- A+
本文摘自国外，估计用的人不多，所以我只是把里面主要的内容做一些解释。
模板文件可以用安装文件来导出, setup.exe /admin，配置完成后就可以导出了。
第一部分 - 默认配置
[General]
Custom=1
| 值 | 描述 |
|---|---|
| ProfileName=ProfileNames | 你的配置文件名称 |
| DefaultProfile=Yes | 配置文件是否设置为默认启动 可选 Yes 或 No |
| OverwriteProfile=Yes | 是否想替代该配置文件或者添加配置? 可选Yes, No, 和 Append. 使用 Append更新当前配置。 |
| ModifyDefaultProfileIfPresent=FALSE | Modifies the default profile if one exists, even if the profile name is different from the one in the PRF. |
| BackupProfile=No | Undocumented property to avoid creating backup copies of a profile. |
| DefaultStore=Service3 | Which PST should be the default message store? Use the Service name that corresponds to the PST |
Section 2 - Services in Profile
This section is pretty straight forward. You'll have one service entry per personal store or address book in your profile. Outlook 2003's Unicode PST is "Unicode Personal Folders" while the Outlook97/2002 (ANSI) format is just "Personal Folders"
[Service List]
;ServiceX=Microsoft Outlook Client
Service1=Personal Folders
Service2=Unicode Personal Folders
Service3=Unicode Personal Folders
Service4=Outlook Address Book
Section 3 - List of Internet Accounts
Each account in your profile is listed in this section, followed by the account type. If you add more accounts in Section 5, be sure to add the accounts here, incrementing the Account#. If you have 6 email accounts, you'll 6 accounts listed, numbered 1 through 6. The account types (POP3, IMAP, HTTP) can be in any order, the examples on this page came from the sample PRF where they were in POP3 and IMAP. Note that HTTP protocol is not longer supported and this PRF does not contain information for Outlook Hotmail Connector.
[Internet Account List]
| Value | Description |
|---|---|
| Account1=I_Mail | I_Mail indicates Account1 is a POP3 (Internet) mail |
| Account2=IMAP_I_Mail | IMAP_I_Mail indicates Account2 is a IMAP account |
Section 4 - Default Values for each Service
| Value | Description |
|---|---|
| [Service1] | Service name, corresponds with the services listed in Section 2. |
| UniqueService=No | Are you limited to one of this service type in a profile? Answer No for PSTs. |
| Name=My Personal Folders | Service name. For PST, this is the display name in the profile. |
| PathToPersonalFolders=%USERPROFILE%\ documents\outlook files\outlook.pst | Where is the pst stored and what is the filename? By default, it's in the user profile. |
| EncryptionType=0x80000000 | Encrpytion type: 0x80000000 = No encryption 0x40000000 = Compressible encryption, the default (ANSI) or 0x50000000 (Unicode) See Note below 0x20000000 = High encryption |
Outlook Address Book service does not need any parameters, it just needs added to the profile:
[Service4]
Section 5 - Values for each Internet Account
Each account needs to be listed here, using the proper format for the account type. The CIW leaves some fields blank, as shown here, unless you selected More options as you added the profiles. To add new accounts, copy the proper account type and paste it following the last account, changing the account information as needed. Don't forget to change the Account# here and add it to Section 3.
POP3 Account Settings
| Value | Description |
|---|---|
| [Account1] | Account number. It needs entered here and in Section 3. Use a different number for each account. |
| UniqueService=No | Can you add the account type more than once? Because you can have more than one POP3, IMAP, or HTTP, you'll use No. |
| AccountName=Outlook Tips POP3 | The name displayed in the Accounts dropdown and on the Send/Receive list. |
| POP3Server=mail.outlook-tips.net | POP3 server name |
| SMTPServer=mail.outlook-tips.net | SMTP server name |
| POP3UserName=outlookt | The username you use to log on to your account |
| EmailAddress=tips@outlook-tips.net | Your email address. |
| POP3UseSPA=0 | Do you use SPA? In most cases, the answer is No, or 0. Enter 1 if you do use SPA. |
| DisplayName=Diane Poremsky | Enter the display name to be used when you send messages. |
| ReplyEMailAddress= | If you use a different reply to address, enter it here. |
| SMTPUseAuth=1 | Are you required to authenticate before sending email? 1 = Yes, 0 = No. |
| SMTPAuthMethod=0 | What authentication method do you use? 0= use same as POP3 logon. 1= Use different credentials. 2= POP before SMTP |
| SMTPUserName=dianep | Username to use when you use different credentials to send mail. |
| ConnectionType=0 | How do you connect to the internet? 0 = LAN. 1 = Use IE's dialer 2 = Use Phone line 3 = Use modem if LAN unavailable. |
| LeaveOnServer=0x0 | Leave mail on the server? 0x0 = No. 0x50001 = Yes, days option unchecked, never delete. 0x90003 = Yes, 9 days, don't delete. 0x50007 = Yes, 5 days, Delete from server when emptying Deleted items |
| ConnectionOID=MyConnection | Dial up connection (DUN) to use. |
| POP3Port=110 | The POP3 port. Leave it on the default of 110 unless you are told to change it. |
| POP3UseSSL=0 | Do you use SSL? In most cases, it's No, which is 0. |
| ServerTimeOut=60 | What is your server time out? 60 seconds is default. |
| SMTPPort=25 | SMTP port number. 25 is default but some servers use 2525 or 587. Leave it at 25 unless you need a different port. |
| SMTPUseSSL=0 | Does your SMTP server use SSL? Leave it on 0 (No) unless told otherwise. |
IMAP Account
| Value | Description |
|---|---|
| [Account2] | Account number. It needs entered here and in Section 3 |
| UniqueService=No | Can you add the account type more than once? Use No for HTTP, POP#, or IMAP accounts. |
| AccountName=AOL-IMAP | The name displayed in the Accounts dropdown and on the Send/Receive list. |
| IMAPServer=imap.aol.com | IMAP server |
| SMTPServer=smtp.aol.com | SMTP server |
| IMAPUserName=poremsky | Your username, used to logon when you check email. |
| EmailAddress=poremsky@aol.com | Email address |
| IMAPUseSPA=0 | Use SPA? 0 = No, only change it if you do need to use SPA. |
| DisplayName=Diane Poremsky | The display name you want to use when you send messages |
| ReplyEMailAddress= | Reply to email address, if different than your sending email address. |
| SMTPUseAuth=1 | Do you need to authenticate to send email? 1= Yes. |
| SMTPAuthMethod=0 | What authentication method do you use? 0= use same as POP3 logon. 1= Use different credentials. 2= POP before SMTP |
| SMTPUserName=dianep | Username to use when you use different credentials to send mail. |
| ConnectionType=0 | How do you connect to the internet? 0 = LAN. 1 = Use IE's dialer 2= Use Phone line 3 = Use modem if LAN unavailable. |
| RootFolder= | Do you use a root folder? If so, enter the path here. |
| ConnectionOID=MyConnection | Dial up networking connection to use. |
| IMAPPort=143 | The port you use to collect email. Default is 143, don't change it unless told to. |
| IMAPUseSSL=0 | Do you use SSL? 0= No. |
| ServerTimeOut=60 | Server timeout. |
| SMTPPort=587 | The SMTP port to use. Default is 25, change it only if your server uses a different port, as AOL does. |
| SMTPUseSSL=0 | Do you use SSL to send mail? 0=No. |
- 我的微信
- 扫一扫加我好友
-
- 微信公众号
- 谈点儿别的
-
